The installation first involved attaching connectors to the wires and covering them with heat shrink tubing (to both protect and stress-relieve them). Next, I made a small bracket to attach the Electronic Advance Module, sealed the module with liquid electrical tape to keep out moisture, and zip-tied everything in place. After this, all that was left was to time the ignition with the help of my friend and a Timing Strobe.
In addition, rather than apply the race registration numbers to the tank, I fabricated some brackets and installed number boards under the seat. Now all I need is warm weather!
 |
| PAMCO Ignition Installed |
 |
| Air Intake Cover with appropriate warning |
 |
| Number Board Bracket |
 |
| Ignition Advance Module Bracket |
 |
| Sealing the Advance Module from Moisture |
 |
| Mounting the Advance Module Under the Seat |
 |
| Wiring Harness Adapter for the Electronic Ignition |
 |
| Ready For Testing and Tuning....once the snow melts. |
No comments:
Post a Comment